Email:news@peweldingmachine.com, sales2@peweldingmachine.com
+86-137 3974 5191
NO.355,Youyi Street,Qiaoxi District,Shijiazhuang,Hebei,China.
Defining the gold standard in geosynthetic welding verification through advanced electrical spark detection technology for ultimate environmental security.
As a global leader in environmental protection equipment, our spark lead tester represents the pinnacle of quality assurance for geomembrane installation, ensuring zero-leakage integrity.
Integrating high-voltage precision circuitry, the spark lead tester delivers unparalleled accuracy in pinpointing micro-defects, reducing project downtime by up to 40% across complex industrial sites.
Our core technical architecture ensures every weld is validated with aerospace-grade precision.
Eliminating signal noise for crystal clear defect detection.
Designed for the most hostile industrial terrains.
Simplifying complex data into actionable insights.
Quantitative evidence of our technical superiority in leak detection.
Comprehensive data sheets for our elite spark lead tester series.
| Model Series | Voltage Range | Response Time | Battery Life | Protection | Optimal Use |
|---|---|---|---|---|---|
| Apex-X1 Ultra | 5-15 kV | < 0.01s | 24 Hours | IP67 | Heavy Industrial Liners |
| Nova-S Prime | 3-10 kV | 0.02s | 18 Hours | IP65 | Standard Pond Liners |
| Titan-G Pro | 8-20 kV | 0.01s | 30 Hours | IP68 | Deep Landfill Cells |
| Eco-V Lite | 2-8 kV | 0.05s | 12 Hours | IP64 | Residential Liners |
| Omni-Z Hybrid | 5-12 kV | 0.02s | 20 Hours | IP66 | Multi-material Welds |
| Prime-K Ultra | 10-15 kV | 0.01s | 22 Hours | IP67 | High-Density Polyethylene |
| Vista-S Core | 4-12 kV | 0.03s | 15 Hours | IP65 | Secondary Containment |
| Zenith-P Max | 12-25 kV | 0.01s | 35 Hours | IP68 | Hazardous Waste Sites |
Note: All voltage ranges are adjustable via the internal calibration menu to suit specific material thicknesses.
Proven performance across diverse industries and challenging environments.
Arctic Tailings Dam
Deployed our Apex series to verify HDPE liners in sub-zero temperatures, detecting 12 critical micro-leaks before operation.
Municipal Landfill Project
Utilized Zenith-P Max for a 50-acre containment area, ensuring environmental compliance with 100% weld verification.
Desalination Plant
Implementing the Nova-S Prime to ensure zero saltwater infiltration in primary containment basins.
Chemical Tank Farm
Applied the Omni-Z Hybrid for multi-layered geomembrane testing, identifying critical flaws in secondary containment.
Hydro-Electric Dam
Used the Titan-G Pro for heavy-duty liner verification, reducing test time by 30% while maintaining absolute precision.
Agricultural Reservoirs
Utilized Eco-V Lite for rapid screening of irrigation liners across multiple small-scale farm sites.
Tailored solutions for demanding industrial environments worldwide.
Critical verification for tailings dams to prevent toxic seepage into groundwater.
Rapid assessment of pond liners to conserve precious water resources in arid regions.
Extreme sensitivity testing for HDPE/LLDPE liners in hazardous acid storage zones.
High-speed validation for tunneling and subway moisture barriers.
Aviation fuel storage liner verification to prevent catastrophic environmental contamination.
Testing liners for battery storage containment areas and solar park drainage systems.
Every unit undergoes a 48-hour stress test and multi-point calibration against NIST standards.
Reinforced polymer casing protects internal electronics from moisture and shock during transport.
Vacuum-sealed moisture-proof packaging with customized flight cases for global shipping.
Recognized globally for unparalleled accuracy in geosynthetic leak detection.
Expert answers to common technical and commercial inquiries.
Our spark lead tester uses high-voltage electrical discharges. When the probe passes over a hole, a spark jumps through the gap, triggering an immediate audio-visual alarm.
Yes, the spark lead tester is compatible with HDPE, LLDPE, PVC, and CSPE. The adjustable voltage allows it to penetrate various material thicknesses.
Depending on the model, our spark lead tester offers between 12 to 35 hours of active testing on a single charge, ensuring full-day site coverage.
To maintain your spark lead tester, clean the probe tip regularly and ensure the grounding lead is firmly attached to the conductive layer.
Yes, since our spark lead tester is IP67 rated, it can operate in rain. However, for maximum accuracy, a dry surface is recommended.
Every spark lead tester comes with a Factory Acceptance Test (FAT) certificate and is built to ASTM D7007 standards.
Elevate your environmental protection standards with the world's most reliable spark lead tester in the dedicated equipment manufacturing sector.
SUBSCRIBE NEWSLETTER
Dear customer, thank you for your attention! We provide high-quality machinery and equipment and look forward to your orders. Please inform us of your needs and we will respond quickly!
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.
